Research on joint motion control for multi-degree-of-freedom manipulatorLI Meiqiang, MA Qinglu, YAN Hao et al.Journal of Mechanical Strength2025, No.021202026-09Development in metal multiaxial fatigue life prediction based on physics-informed neural networkZHANG Zhuanli, SUN Xingyue, CHEN XuJournal of Mechanical Strength2025, No.02702026-09Forecast of bending fatigue life for gears considering the influence of residual stress and hardnessZHAO Pengbo, CHEN Yong, YOU Hui et al.Journal of Mechanical Strength2025, No.02602026-09Gearbox fault diagnosis method based on multi-sensor data fusion and GANYANG Xingyu, SONG Chunsheng, WU XiaoyangJournal of Mechanical Strength2025, No.06502026-09Static and dynamic characteristic analysis and multi-objective topology optimization of gearboxLIU Wei, ZHU Xiang, GAO Ting et al.Journal of Mechanical Strength2025, No.02402026-09Modeling and influencing factor analysis of worn sprockets in mining scraper conveyorWANG PengJournal of Mechanical Strength2025, No.07402026-09Structural reliability optimization design of reinforced shell structure based on adaptive surrogate modelLIU Yuzhuo, CAO Lixiong, WU Jianguo et al.Journal of Mechanical Strength2025, No.02302026-09Multi-source heterogeneous data fusion model for reliability evaluation based on approximate failure pointsYANG Tongbo, WEI Zheng, ZHOU KunJournal of Mechanical Strength2025, No.03302026-09Research on the application of particle damping tuned mass damper in the lateral vibration suppression of 5G communication towerLUO Yuanyi, XIAO Wangqiang, REN ZhixingJournal of Mechanical Strength2025, No.05302026-09Structural design and performance analysis of wind turbine blade based on bionicsZHU Haibo, MIAO Weipao, WANG Haisheng et al.Journal of Mechanical Strength2025, No.04302026-09Bearing fault diagnosis method based on improved compressed sensing and deep multi-kernel extreme learning machineFU Qiang, HU Dong, YANG Tongliang et al.Journal of Mechanical Strength2025, No.06302026-09Study on the effect of surface composite strengthening on the surface integrity of 18CrNiMo7-6 carburized gear steelWANG Zhen, SUN Hao, CUI Yilong et al.Journal of Mechanical Strength2025, No.08302026-09Fault diagnosis of gearbox under variable working condition based on weighted subdomain adaptive adversarial networkZHANG Huiyun, ZUO Fangjun, YU Xi et al.Journal of Mechanical Strength2025, No.03302026-09Optimization design of anti-creep reinforcement structure for solid rocket motor propellant grainLIU Mengyang, GAO Jingwei, YAN Bo et al.Journal of Mechanical Strength2025, No.03302026-09Design and performance analysis of orifice-compensated aerostatic bearingsQIU Dezhong, LEI Weining, XUE YapingJournal of Mechanical Strength2025, No.11302026-09Carbon fiber and glass fiber mixed design and structural performance analysis for large wind turbine bladeFAN Shijie, MIAO Weipao, LI Chun et al.Journal of Mechanical Strength2025, No.02202026-09Numerical simulation and test verification of Maxwell disk type permanent magnet damping roller deviceMAO Jun, WANG Di, XIE Miao et al.Journal of Mechanical Strength2025, No.03202026-09Bolt loosening angle detection method based on color segmentationKANG Jingjie, ZHANG Lijun, SUN Yuandong et al.Journal of Mechanical Strength2025, No.05202026-09Research on impact resistance behavior of titanium/steel composite plates with the ripple interfaceLIANG Zirui, REN Luze, CAO Yong et al.Journal of Mechanical Strength2025, No.05202026-09Low-cycle fatigue reliability analysis of engine pistons based on PC-Kriging modelLI Wei, LI Liansheng, DU Zunfeng et al.Journal of Mechanical Strength2025, No.05202026-09 