Preparation and characterization of pouch cell based on solid-state electrolyte membrane
WU Yongmin
MA Shangde
TIAN Wensheng
WU Xiaomeng
ZHU Lei
BAI Yu
MENG Yufeng
GU Meirong
ZHANG Wei
WEN Zhenhai
JIN Jun
YANG Cheng
Abstract：Solid-state batteries with high safety can adapt to high-capacity cathodes and anodes,which is the direction of battery development.However,it also has problems such as large solid-phase interface impedance and inadequate interface structure stability.In order to quickly evaluate the role of solid-state battery technology in practical batteries,a solid electrolyte membrane with an ionic conductivity of 6.16 × 10-4 S/cm at 50 ℃ was prepared by casting method.Using high nickel ternary material as cathode and graphite as anode,a micro-pouch battery with weight of 1.121 4 g and capacity of 53.44 mAh and a high capacity pouch battery with capacity of 7 252.8 mAh were fabricated.The micro-pouch battery showed 150 cycles at a high discharge C-rate of 5 C.The high capacity pouch battery achieved 439 cycles at the DOD of 13.78％.The above results indicate that the solid electrolyte membrane is suitable for the practical applications of lithium ion batteries.However,the interface in these batteries still has some drawbacks.Based on the results of this paper,it is expected to promote the development of high-performance batteries by improving solid-state electrolyte materials and battery formation.
Keywords：solid-state electrolyte membranetape castingpouch celllithium ion battery
Publication Date：2024-06-25
Online Publishing Date：2025-08-15(First online date of this platform, not the publication date of the document)
Pages：6( 157-162 )